COPY AND PASTE THIS LINK FOR A VIDEO OF THIS PLANE
Item No: CY8036
All wood construction, Cowl and other components are fiberglass
Wingspan: (87 in)
Wing area: (1105 sq.in)
Length: (67 in)
Engine: 26-35 gas engine
Radio: 5 Channles;7 Servos
Empty weight: 9.9 lbs
Excellent covering job on the on green and black camo design and a bright blue on the bottom for excellent contrast and visibly.
Balance 135-145mm back from leading edge. elevator throws 65mm up and down. aileron throws- 60mm up/down. Rudder throws- 105mm R/L
Cowling size: 9.5" diameter, 10" deep, 6 1/2" from pre-installed motor box to prop washer. On the plane we inspected the cowling fits very tight.
Plane has very large top hatch that is 24" long and with of plane ( 8 1/2" at front, tapering to 6 1/2" at rear of hatch)Hatch attaches with 4 allen head bolts (2 on each side). Canopy is not pre-attached to hatch. Hatch is so large that it should handle any electric set up.
Wing joins together with a large 29" alum. wing tube and attaches at rear with 2 screws and leading edge with hardwood tabs that slot into airframe. Instruction manual says to epoxy wing halves together, but I don't see why it can't be a 2 piece wing construction with minor modification. Construction of fuselage is plenty strong for a modification. My only concern with a 2 piece wing configuration is that the landing gear mounts into the wings and a hard landing could cause damage if not done properly.
Comes with Complete hardware kit including fuel tank, 3 1/2" foam wheels, pull pull rudder kit, nylon hinges that join with metal pins, 1 3/4" tail wheel, extra heavy landing gear that attach into the 1 piece fiberglass wheel pants assembly. Motor mount is not included.
Excellent construction, excellent covering, access to battery and electronics is excellent.