WE had THIS PLANE IN ALL 3 COLORS THAT ARE LISTED FOR STICK AIRPLANES.
New item for 2011. (OVER SIZE SHIPPING AND DOUBLE BOXED) We have the factory double box (or crate) our planes and they do an over-kill which makes the fgt. higher because of box size. But who want a busted plane and try to collect from the fgt. carrier?
This is an ARF and not a kit. Comes with complete hardware kit that includes- 2 1/5" foam wheels' fuel tank alum. landing gear that attaches with 3 screws, spinner, push rods, tail wheel, etc.
Details are as follows:
Fuselage- Lite ply construction with lighting holes to save weight, Servo tray is installed and is located under the wing (1 servo for throttle, 1 servo for rudder and 1 servo for elevator). Firewall measures 3 1/2" wide and 3 5/8" tall. Landing gear attaches 5 1/8" back from firewall and uses 3 screws. Fuselage has a hatch located between wing and firewall with a spring loaded latch that lets you service the fuel tank (or batteries if you are using electric power)
Wing- 2 inches thick, 13 5/8" cord, symmetrical design, built up balsa design. has hardwood joiner and the 2 halves epoxy together. Uses 2 aileron servos for the ailerons (1 under each wing half). Ailerons are 17 1/2" by 3 1/4".
Tail Feathers - 7 1/2" cord including elevator halves. Horizontal stab. is 17 1/2" on leading edge tapering to 22" at rear (with elevator halves installed). Elevator halves are 8 1/2" by 3 1/4" each and join together with the pre-bent wire included. (be careful here and make sure it is a strong bond)). Vertical stab. is 71/4" tall and 8 1/2" long tapering to 2 inches at the top. Rudder is 8 1/2" tall. Rudder is 4 inches at the bottom tapering to 2 inches at the top.
Wingspan: 58.5 inches
Wing area:760 sq. in.
Length: 58 inches
Engine: 2C 0.40-0.60 cu.in
Radio: 4 Channel;5 Servos
Weight: 3lb. 11oz.